An approach to assessing subsea pipeline-associated mercury release into the North Sea and its potential environmental and human health impact.

Mercury is a naturally occurring heavy metal that has also been associated with anthropogenic sources such as cement production or hydrocarbon extraction. Mercury is a contaminant of concern as it can have a significant negative impact on organismal health when ingested. In aquatic environments, it bioaccumulates up the foodweb, where it then has the potential to impact human health. With the offshore hydrocarbon platforms in the North Sea nearing decommissioning, they must be assessed as a potential source for the environmental release of mercury. International treaties govern the handling of materials placed in the ocean. Studies have assessed the ecologic and economic benefits of (partial) in situ abandonment of the infrastructure as artificial reefs. This can be applied to pipelines after substantial cleaning to remove mercury accumulation from the inner surface. This work outlines the application of an approach to modelling marine mercury bioaccumulation for decommissioning scenarios in the North Sea. Here, in situ decommissioning of cleaned pipelines was unlikely to have a negative impact on the North Sea food web or human health. However, significant knowledge gaps have been determined, which must be addressed before all negative impacts on ecosystems and organismal health can be excluded.

High resolution visualisation of tiemannite microparticles, essential in the detoxification process of mercury in marine mammals.

The North Sea is an ecologically rich habitat for marine wildlife which has also been impacted by industrial developments and anthropogenic emissions of contaminants such as mercury. Marine mammals are particularly susceptible to mercury exposure, due to their trophic position, long lifespan, and dependence on (increasingly contaminated) aquatic prey species. To mitigate impact, marine mammals can detoxify methylmercury by binding it to selenium-containing biomolecules, creating insoluble mercury selenide granules. Here, liver, kidney, muscle, and brain samples from an adult male bottlenose dolphin (Tursiops truncatus) with known elevated mercury concentrations were analysed through scanning electron microscopy (SEM). Tiemannite (HgSe) deposits were identified in all organs, ranging from 400 nm to 5 µm in diameter, with particle size being organ-dependent. Although reported in other studies, this is the first time that the three-dimensional nature of tiemannite is captured in marine mammal tissue.

Super food or super toxic? Turmeric and spirulina as culprits for the toxic effects of food dyes in Drosophila.

Prolonged exposure to food dyes, even for those considered safe for consumption, are known to have toxic effects. However, we lack a proper understanding of the underlying compounds that are responsible for the observed toxicity. Here, we tested the toxic effects of three common commercially available natural food dyes (red, green, blue), and their main ingredients (turmeric and spirulina), on Drosophila melanogaster oviposition, larval development, and larval foraging behaviour. Larval development and egg-to-adult survival was significantly impacted by blue and green dyes. These effects were recapitulated when flies were fed with increasing concentrations of turmeric and spirulina, suggesting that turmeric is a toxic component of the food dye. Red dye, which contains neither turmeric or spirulina, had little impact on fly health and behaviour. Green and blue food dyes decreased egg laying, an effect similar to that observed in increasing concentrations of turmeric and, to a lesser extent, spirulina. When given a choice, larvae preferred to feed as follows: control > red > blue > green diet patches, a pattern inversely correlating with the previously observed toxicity. Our results show that, despite turmeric being often considered a super food, it can have toxic effects that the impact health of organisms.

Considerations for future quantitative structure-activity relationship (QSAR) modelling for heavy metals - A case study of mercury.

With increasing annual chemical development and production, safety testing demands and requirements have also increased. In addition to traditional animal testing, quantitative structure-activity relationship (QSAR) modelling can be used to predict the biological effect of a chemical structure, based on the analysis of quantitative characteristics of structure features. Whilst suitable for e.g., pharmaceuticals, other compounds can be more challenging to model. The naturally occurring heavy metal mercury speciates in the environment, with some toxic species accumulating in aquatic organisms. Although this is well known, only little data is available from (eco)toxicological studies, none of which account for this speciation behaviour. The present work highlights the current toxicity data for mercury in aquatic animals and gaps in our understanding and data for future QSAR modelling. All publicly available ecotoxicology data was obtained from databases and literature. Only few studies could be determined that assessed mercury toxicity in aquatic species. Of these, likely speciation products were determined using PHREEQc. This highlighted that the mercury exposure species was not always the predominant species in the medium. Finally, the descriptors for the modelled species were obtained from ChemDes, highlighting the limited availability of such details. Additional testing is required, accounting for speciation and biological interactions, to successfully determine the toxicity profile of different mercury species in aquatic environments. In the present work, insufficient mercury-species specific data was obtained, to conduct QSAR modelling successfully. This highlights a significant lack of data, for a heavy metal with potentially fatal repercussions.

The sensitivity of the zebrafish embryo coiling assay for the detection of neurotoxicity by compounds with diverse modes of action.

In the aim to determine neurotoxicity, new methods are being validated, including tests and test batteries comprising in vitro and in vivo approaches. Alternative test models such as the zebrafish (Danio rerio) embryo have received increasing attention, with minor modifications of the fish embryo toxicity test (FET; OECD TG 236) as a tool to assess behavioral endpoints related to neurotoxicity during early developmental stages. The spontaneous tail movement assay, also known as coiling assay, assesses the development of random movement into complex behavioral patterns and has proven sensitive to acetylcholine esterase inhibitors at sublethal concentrations. The present study explored the sensitivity of the assay to neurotoxicants with other modes of action (MoAs). Here, five compounds with diverse MoAs were tested at sublethal concentrations: acrylamide, carbaryl, hexachlorophene, ibuprofen, and rotenone. While carbaryl, hexachlorophene, and rotenone consistently induced severe behavioral alterations by ~ 30 h post fertilization (hpf), acrylamide and ibuprofen expressed time- and/or concentration-dependent effects. At 37-38 hpf, additional observations revealed behavioral changes during dark phases with a strict concentration-dependency. The study documented the applicability of the coiling assay to MoA-dependent behavioral alterations at sublethal concentrations, underlining its potential as a component of a neurotoxicity test battery.

An approach to assess potential environmental mercury release, food web bioaccumulation, and human dietary methylmercury uptake from decommissioning offshore oil and gas infrastructure.

Subsea pipelines carrying well fluids from hydrocarbon fields accumulate mercury. If the pipelines (after cleaning and flushing) are abandoned in situ, their degradation may release residual mercury into the environment. To justify pipeline abandonment, decommissioning plans include environmental risk assessments to determine the potential risk of environmental mercury. These risks are informed by environmental quality guideline values (EQGVs) governing concentrations in sediment or water above which mercury toxicity may occur. However, these guidelines may not consider e.g., the bioaccumulation potential of methylated mercury. Therefore, EQGVs may not protect humans from exposure if applied as the sole basis for risk assessments. This paper outlines a process to assess the EQGVs' protectiveness from mercury bioaccumulation, providing preliminary insights to questions including how to (1) determine pipeline threshold concentrations, (2) model marine mercury bioaccumulation, and (3) determine exceedance of the methylmercury tolerable weekly intake (TWI) for humans. The approach is demonstrated with a generic example using simplifications to describe mercury behaviour and a model food web. In this example, release scenarios equivalent to the EQGVs resulted in increased marine organism mercury tissue concentrations by 0-33 %, with human dietary methylmercury intake increasing 0-21 %. This suggests that existing guidelines may not be protective of biomagnification in all circumstances. The outlined approach could inform environmental risk assessments for asset-specific release scenarios but must be parameterised to reflect local environmental conditions when tailored to local factors.

Threshold values for the protection of marine ecosystems from NORM in subsea oil and gas infrastructure.

This modelling study uses the ERICA Tool and Bateman's equation to derive sediment threshold values for radiation protection of the marine environment relevant to NORM-contaminated products (radium-contaminated scales, 210Pb films and 210Po films) found in subsea oil and gas infrastructure. Threshold values are calculated as the activity concentration of the NORM-contaminated products' head of chain radionuclide (i.e., 226Ra + 228Ra, 210Pb, or 210Po) that will increase radiation dose rates in sediments by 10 µGy/h to the most exposed organism at a given release time. The minimum threshold value (corresponding to peak radiation dose rates from the ingrowth of progeny) were for radium-contaminated scales, 0.009 Bq/g of 226Ra, 0.029 Bq/g of 228Ra (in the absence of 226Ra) or 0.14 Bq/g of 228Ra (in the presence of 226Ra), followed by 0.015 Bq/g for 210Pb films, and 1.6 Bq/g for 210Po films. These may be used as default threshold values. Added activity concentrations of the NORM-contaminated products to marine sediments below these threshold values implies a low radiological risk to organisms while exceedances imply that further investigation is necessary. Using contaminated product specific parameterisations, such as Kd values derived for Ra from a BaSO4 matrix in seawater, could greatly affect threshold values. Strong consideration should be given to deriving such data as part of specific radiological risk assessments for these products.

Current understanding of the ecological risk of mercury from subsea oil and gas infrastructure to marine ecosystems.

Many oil and gas fields are nearing production cessation and will require decommissioning, with the preferred method being complete infrastructure removal in most jurisdictions. However, decommissioning in situ, leaving some disused components in place, is an option that may be agreed to by the regulators and reservoir titleholders in some circumstances. To understand this option's viability, the environmental impacts and risks of any residual contaminants assessed. Mercury, a contaminant of concern, is naturally present in hydrocarbon reservoirs, may contaminate offshore processing and transmission infrastructure, and can biomagnify in marine ecosystems. Mercury's impact is dependent on its speciation, concentration, and the exposure duration. However, research characterising and quantifying the amount of mercury in offshore infrastructure and the efficacy of decontamination is limited. This review describes the formation of mercury-contaminated products within oil and gas infrastructure, expected exposure pathways after environmental release, possible impacts, and key research gaps regarding the ecological risk of in situ decommissioned contaminated infrastructure. Suggestions are made to overcome these gaps, improving the in situ mercury quantification in infrastructure, understanding environmental controls on, and forecasting of, mercury methylation and bioaccumulation, and the cumulative impacts of multiple stressors within decommissioned infrastructures.

Zebrafish embryo neonicotinoid developmental neurotoxicity in the FET test and behavioral assays.

The need for reliable, sensitive (developmental) neurotoxicity testing of chemicals has steadily increased. Given the limited capacities for routine testing according to accepted regulatory guidelines, there is potential risk to human health and the environment. Most toxicity studies are based on mammalian test systems, which have been questioned for low sensitivity, limited relevance for humans, and animal welfare considerations. This increased the need for alternative models, one of which is the zebrafish (Danio rerio) embryo. This study assessed selected neonicotinoids at sub-lethal concentrations for their effects on embryonic development and behavior. The fish embryo acute toxicity test (OECD TG 236) determined the lowest observable effective concentrations, which were used as the highest test concentrations in subsequent behavioral assays. In the FET test, no severe compound-induced sublethal effects were seen at < 100 µM. In the coiling assay, exposure to ≥ 1.25 µM nicotine (positive control) affected both the burst duration and burst count per minute, whereas ≥ 50 µM thiacloprid affected the mean burst duration. Exposure to ≥ 50 µM acetamiprid and imidacloprid induced significant alterations in both mean burst duration and burst count per minute. In the swimming assay, 100 µM acetamiprid induced alterations in the frequency and extent of movements, whilst nicotine exposure only induced non-significant changes. All behavioral changes could be correlated to findings in mammalian studies. Given the quest for alternative test methods of (developmental) neurotoxicity, zebrafish embryo behavior testing could be integrated into a future tiered testing scheme.

Accumulation, Depuration, and Biological Effects of Polystyrene Microplastic Spheres and Adsorbed Cadmium and Benzo(a)pyrene on the Mussel Mytilus galloprovincialis.

Filter feeders are target species for microplastic (MP) pollution, as particles can accumulate in the digestive system, disturbing feeding processes and becoming internalized in tissues. MPs may also carry pathogens or pollutants present in the environment. This work assessed the influence of polystyrene (PS) MP size and concentration on accumulation and depuration time and the role of MPs as vectors for metallic (Cd) and organic (benzo(a)pyrene, BaP) pollutants. One-day exposure to pristine MPs induced a concentration-dependent accumulation in the digestive gland (in the stomach and duct lumen), and after 3-day depuration, 45 µm MPs appeared between gill filaments, while 4.5 µm MPs also occurred within gill filaments. After 3-day exposure to contaminated 4.5 µm MPs, mussels showed increased BaP levels whilst Cd accumulation did not occur. Here, PS showed higher affinity to BaP than to Cd. Three-day exposure to pristine or contaminated MPs did not provoke significant alterations in antioxidant and peroxisomal enzyme activities in the gills and digestive gland nor in lysosomal membrane stability. Exposure to dissolved contaminants and to MP-BaP caused histological alterations in the digestive gland. In conclusion, these short-term studies suggest that MPs are ingested and internalized in a size-dependent manner and act as carriers of the persistent organic pollutant BaP.

Expanding the Miscanthus market in the UK: Growers in profile and experience, benefits and drawbacks of the bioenergy crop.

To achieve net zero greenhouse gas emission by 2050 as set out by the 2019 amendment to the 2008 UK Climate Change Act, a major shift towards renewable energy is needed. This includes the development of new methods along with improving and upscaling existing technologies. One example of new methods in bioenergy is developing new Miscanthus cultivars for electricity generation via thermal power station furnaces. Miscanthus is still relatively new compared with other agriculture practices, so market assessments and improvements are needed to reduce the barriers to entry for prospective growers. This publication provides a profile of UK Miscanthus growers and their businesses, their experiences of benefits and drawbacks of the crop, and what they see as potential barriers to entry for prospective farmers. A survey of current Miscanthus growers in England and Wales was conducted and indicated that most farmers were content with the crop and that its environmental and economic benefits were noted. However, it was evident that with a geographically limited UK market, growers wanted to see a better distribution of biomass processing stations to reduce the ongoing costs of transport. With growing demand for renewables, including bio-energy sources, it was determined important to provide information and support for stable farming operations and to incentivise the adoption of Miscanthus. Such incentives include ongoing development of new cultivars, focussing on traits such as production potential and stressor resilience, and growers indicated preference for an annual planting grant. These developments are predicted to further improve the crop's profit margin, making it a more cost-effective crop for farmers. Sensitively managed Miscanthus also has the potential to contribute to carbon sequestration, soil health, and aspects of farmland biodiversity. Incentivising such management in government land-based environmental schemes would offer additional income streams and help to promote environmental positive crop planting.

Specificity of time- and dose-dependent morphological endpoints in the fish embryo acute toxicity (FET) test for substances with diverse modes of action: the search for a "fingerprint".

The fish embryo acute toxicity (FET) test with the zebrafish (Danio rerio) embryo according to OECD TG 236 was originally developed as an alternative test method for acute fish toxicity testing according to, e.g., OECD TG 203. Given the versatility of the protocol, however, the FET test has found application beyond acute toxicity testing as a common tool in environmental hazard and risk assessment. Whereas the standard OECD guideline is restricted to four core endpoints (coagulation as well as lack of somite formation, heartbeat, and tail detachment) for simple, rapid assessment of acute toxicity, further endpoints can easily be integrated into the FET test protocol. This has led to the hypothesis that an extended FET test might allow for the identification of different classes of toxicants via a "fingerprint" of morphological observations. To test this hypothesis, the present study investigated a set of 18 compounds with highly diverse modes of action with respect to acute and sublethal endpoints. Especially at higher concentrations, most observations proved toxicant-unspecific. With decreasing concentrations, however, observations declined in number, but gained in specificity. Specific observations may at best be made at test concentrations ≤ EC10. The existence of a "fingerprint" based on morphological observations in the FET is, therefore, highly unlikely in the range of acute toxicity, but cannot be excluded for experiments at sublethal concentrations.

The EU-ToxRisk method documentation, data processing and chemical testing pipeline for the regulatory use of new approach methods.

Hazard assessment, based on new approach methods (NAM), requires the use of batteries of assays, where individual tests may be contributed by different laboratories. A unified strategy for such collaborative testing is presented. It details all procedures required to allow test information to be usable for integrated hazard assessment, strategic project decisions and/or for regulatory purposes. The EU-ToxRisk project developed a strategy to provide regulatorily valid data, and exemplified this using a panel of > 20 assays (with > 50 individual endpoints), each exposed to 19 well-known test compounds (e.g. rotenone, colchicine, mercury, paracetamol, rifampicine, paraquat, taxol). Examples of strategy implementation are provided for all aspects required to ensure data validity: (i) documentation of test methods in a publicly accessible database; (ii) deposition of standard operating procedures (SOP) at the European Union DB-ALM repository; (iii) test readiness scoring accoding to defined criteria; (iv) disclosure of the pipeline for data processing; (v) link of uncertainty measures and metadata to the data; (vi) definition of test chemicals, their handling and their behavior in test media; (vii) specification of the test purpose and overall evaluation plans. Moreover, data generation was exemplified by providing results from 25 reporter assays. A complete evaluation of the entire test battery will be described elsewhere. A major learning from the retrospective analysis of this large testing project was the need for thorough definitions of the above strategy aspects, ideally in form of a study pre-registration, to allow adequate interpretation of the data and to ensure overall scientific/toxicological validity.